AiDOPWarehouse/server/Plugins/Admin.NET.Plugin.AiDOP/FinishedWarehouse/FqcInspBillFlowBizHandler.cs

using Admin.NET.Plugin.AiDOP.Infrastructure;
using Admin.NET.Plugin.ApprovalFlow;
using Admin.NET.Plugin.ApprovalFlow.Service;

namespace Admin.NET.Plugin.AiDOP.FinishedWarehouse;

/// <summary>
/// S7 FQC 成品检验单流程常量（BizType / 节点码 / 角色码 / 角色固定 Id / UAT）。集中避免散落字符串。
/// 最小线性流程：start → N1_INSPECT(检验员) → N2_SUP_REVIEW(检验主管) → end（无网关、无 SQE）。
/// </summary>
public static class FqcInspBillFlowConst
{
    /// <summary>流程业务类型编码</summary>
    public const string BizType = "S7_FQC_INSPBILL";

    /// <summary>N1 检验员检验节点</summary>
    public const string NodeInspect = "N1_INSPECT";

    /// <summary>N2 检验主管审核节点</summary>
    public const string NodeSupervisor = "N2_SUP_REVIEW";

    /// <summary>GW_RESULT 排他网关（按 disposition_required 分流：==1→N3，否则→end）</summary>
    public const string GatewayResult = "GW_RESULT";

    /// <summary>N3 QE 处置节点（不合格 pd=1 进入）</summary>
    public const string NodeDisposition = "N3_QE_DISPOSITION";

    /// <summary>检验员角色编码</summary>
    public const string RoleInspectorCode = "ROLE_S7_FQC_INSPECTOR";

    /// <summary>检验主管角色编码</summary>
    public const string RoleSupervisorCode = "ROLE_S7_FQC_SUPERVISOR";

    /// <summary>质量工程师(QE)角色编码</summary>
    public const string RoleQeCode = "ROLE_S7_FQC_QE";

    /// <summary>检验员角色固定 Id（种子与流程定义共用；S7 段 1329915020xxx，避开 S5 的 1329915010xxx）</summary>
    public const long RoleInspectorId = 1329915020001L;

    /// <summary>检验主管角色固定 Id</summary>
    public const long RoleSupervisorId = 1329915020002L;

    /// <summary>QE 角色固定 Id</summary>
    public const long RoleQeId = 1329915020003L;

    /// <summary>流程定义版本（v2 加入 GW_RESULT/N3_QE_DISPOSITION；seed 幂等升级依据）</summary>
    public const int FlowDefinitionVersion = 2;

    /// <summary>UAT 冒烟绑定账号（同绑三角色，仅 UAT 自审）</summary>
    public const string UatAccount = "superAdmin.NET";

    // 检验任务执行状态 FINSPECTSTATUS：未检验 / 检验中 / 检验完成
    public const string InspectStatusDone = "检验完成";

    // pd 判定：0=合格 1=不合格 ｜ clfs 处理方式：0=让步接收 1=挑选 2=报废
    // QE 处置类型（string，仅记录方案，不触发实际动作）
    public const string DispTypeRework = "REWORK";
    public const string DispTypeConcession = "CONCESSION";
    public const string DispTypeScrap = "SCRAP";
    public const string DispTypeOther = "OTHER";
}

/// <summary>
/// S7 FQC 成品检验单审批流回调处理器（BizType=S7_FQC_INSPBILL）。
///
/// 本批（检验员+主管最小闭环）Handler 全部 no-op：不写 qms、不写库存/仓储/生产状态、不发额外通知。
/// 检验业务结果 pd/hgsl/bhgsl/clfs 与检验任务 qms_fqcbj 字段由 FqcInspBillFlowService.submit-result 在事务内写入；
/// 审批节点/待办/审核状态由 ApprovalFlowInstance 承载，绝不写入 qms_qcpp_inspbill.FBILLSTATUS 或 qms_fqcbj.FINSPECTSTATUS。
/// GetBizData 仅返回基础信息供流程日志/展示（本批线性流程无网关条件）。
/// </summary>
public class FqcInspBillFlowBizHandler : IFlowBizHandler, ITransient
{
    public string BizType => FqcInspBillFlowConst.BizType;

    private readonly ISqlSugarClient _db;

    public FqcInspBillFlowBizHandler(ISqlSugarClient db)
    {
        _db = db;
    }

    /// <summary>流程发起后回调：本批 no-op。</summary>
    public Task OnFlowStarted(long bizId, long instanceId) => Task.CompletedTask;

    /// <summary>单节点完成回调：本批 no-op。</summary>
    public Task OnNodeCompleted(long bizId, long instanceId, string nodeId, string nodeName, long? approverUserId) => Task.CompletedTask;

    /// <summary>流程结束回调：本批 no-op（不写 qms/库存/仓储/生产；审核结果由 ApprovalFlowInstance 状态承载）。</summary>
    public Task OnFlowCompleted(long bizId, long instanceId, FlowInstanceStatusEnum finalStatus, long? lastApproverId) => Task.CompletedTask;

    /// <summary>
    /// 返回检验单基础信息 + 网关判据 disposition_required（GW_RESULT 按此分流：==1→N3，否则→end）。
    ///
    /// disposition_required 由 pd 在 C# 侧计算（pd 为 varchar，直接在流程定义写 "pd == 1" 会 string==int 脆弱）：
    /// pd 去空后 == "1"(不合格) → 1(进 QE 处置)；null/"0"/其它值 → 0(合格结束)。检验员 N1 已写 pd，主管 N2 通过后网关读取。
    /// </summary>
    public async Task<Dictionary<string, object>> GetBizData(long bizId)
    {
        var tid = QmsTenantScope.Current();
        var rows = await _db.Ado.SqlQueryAsync<FqcInspBillFlowBizData>(
            "SELECT FBILLNO AS BillNo, FMATERIALCFG AS MaterialCode, wlmc AS MaterialName, pd AS Pd, clfs AS Clfs FROM qms_qcpp_inspbill WHERE id=@id AND tenant_id=@TenantFilter LIMIT 1",
            new List<SugarParameter> { new("@id", bizId), new("@TenantFilter", tid) });
        var r = rows.FirstOrDefault();
        var dispositionRequired = (r?.Pd?.Trim() == "1") ? 1 : 0;
        if (r == null) return new Dictionary<string, object> { ["disposition_required"] = dispositionRequired };
        return new Dictionary<string, object>
        {
            ["billNo"] = r.BillNo ?? "",
            ["materialCode"] = r.MaterialCode ?? "",
            ["materialName"] = r.MaterialName ?? "",
            ["pd"] = r.Pd ?? "",
            ["clfs"] = r.Clfs ?? -1,
            ["disposition_required"] = dispositionRequired,
        };
    }

    private class FqcInspBillFlowBizData
    {
        public string? BillNo { get; set; }
        public string? MaterialCode { get; set; }
        public string? MaterialName { get; set; }
        public string? Pd { get; set; }
        public int? Clfs { get; set; }
    }
}