feat(s0): seed UAT S0 operational master data

为 UAT 租户 UATTEST_CHL 落地 S0 制造/仓储/产销主数据，覆盖 20 个页面、
21 张表共 110 行（COPY 53 + CONSTRUCT 57）。

- 1.0.408.sql：4 SET + 21 INSERT，只写目标租户；
  源租户 AIDOP(797…229) / AIDOP-Demo(797…230) / AIDOPB 与默认租户零变更
- 1.0.408.verify.sql：92 条断言（行数/FK 闭合/业务键唯一/目标 scope/
  DEMO 卫生正反双证/合同评审主从工时一致/源与默认租户守卫/既有 S0 回归）
- 全部 INSERT 带 NOT EXISTS 幂等 guard，正式 replay 影响行为 0
- PK 策略逐表实证：18 表 auto_increment 不赋值；
  ic_substitute / ado_kitting_exclude_rule 用固定 ID 块；
  PriorityCode.RecID(varchar36) 用固定 GUID 字面量
- DEMO 业务码 rekey：DevMonitor 与 PreprocessElementParam 的
  要素编码/参数编码、ImageType 文件类型编码统一 DEMO-* → UATD-*
  （均为页面直接展示列），描述去 [DEMO] 标记
- 合同评审周期只取完整工厂 1329900200002 的 5 主 + 15 从，
  分解工时按阶段汇总与主表 8/12/8/10/2 精确一致
- ItemPackMaster 因 uk(Domain,ItemNum) 不含 tenant，10 行取自实测无碰撞物料集
- LineSkill 因 Site 语义无业务出处，本批整体排除

chore: bump version server 1.0.408

server/Admin.NET.Web.Entry/Admin.NET.Web.Entry.csproj

@@ -11,9 +11,9 @@
     <GenerateSatelliteAssembliesForCore>true</GenerateSatelliteAssembliesForCore>
     <Copyright>Admin.NET</Copyright>
     <Description>Admin.NET 通用权限开发平台</Description>
-    <AssemblyVersion>1.0.407</AssemblyVersion>
-    <FileVersion>1.0.407</FileVersion>
-    <Version>1.0.407</Version>
+    <AssemblyVersion>1.0.408</AssemblyVersion>
+    <FileVersion>1.0.408</FileVersion>
+    <Version>1.0.408</Version>
   </PropertyGroup>
 
   <ItemGroup>
@@ -565,6 +565,12 @@
     <None Update="UpdateScripts\1.0.407.verify.sql">
       <CopyToOutputDirectory>Always</CopyToOutputDirectory>
     </None>
+    <None Update="UpdateScripts\1.0.408.sql">
+      <CopyToOutputDirectory>Always</CopyToOutputDirectory>
+    </None>
+    <None Update="UpdateScripts\1.0.408.verify.sql">
+      <CopyToOutputDirectory>Always</CopyToOutputDirectory>
+    </None>
   </ItemGroup>
 
   <ItemGroup>

server/Admin.NET.Web.Entry/UpdateScripts/1.0.408.sql

@@ -0,0 +1,498 @@
+-- ===========================================================================
+-- S0-FULL-DEMO-COVERAGE-CLOSURE-1 / STEP 2B — MFG / WAREHOUSE / MASTER DATA
+--
+-- 目标租户：UATTEST_CHL
+-- 目标页面：20 页（0 行 → 有数据）
+-- 行数：110 = COPY 53 + CONSTRUCT 57
+--
+-- 数据源（只读，绝不写）：
+--   @src      AIDOP        797…229   主源
+--   @src_crc  AIDOP-Demo   797…230   仅合同评审周期（唯一存在该数据的租户，且只取完整工厂 …002）
+--   默认租户 1300000000001 全程不作为 seed 源，不读不写
+--
+-- 幂等：每条 INSERT 均带 NOT EXISTS 业务键 guard，重跑影响行数为 0
+--
+-- PK 策略（逐表实证 information_schema.COLUMNS.EXTRA）：
+--   18 张表为 auto_increment       → 不给主键
+--   ic_substitute / ado_kitting_exclude_rule → 固定 ID 块 3200000000000xxxxx
+--   PriorityCode.RecID varchar(36) → 固定 GUID 字面量（schema 要求 GUID 形态）
+--
+-- 不含 tenant 的 UK（全表级碰撞风险）：
+--   uk_ItemPackMaster_domain_itemnum (Domain+ItemNum)
+--     → 10 行全部取自实测「目标 Domain 下无占用」的物料集，见 §10
+--   IX_LineSkillMaster / IX_LineSkillDetail
+--     → 本批不涉及；LineSkill 已整体排除（Site 语义无出处），
+--        另立 S0-LINESKILL-TENANT-UK-CLOSURE-1
+-- ===========================================================================
+
+SET @src     := (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id = t.OrgId WHERE o.Code = 'AIDOP'       AND t.Status = 1 LIMIT 1);
+SET @src_crc := (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id = t.OrgId WHERE o.Code = 'AIDOP-Demo'  AND t.Status = 1 LIMIT 1);
+SET @dst     := (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id = t.OrgId WHERE o.Code = 'UATTEST_CHL' AND t.Status = 1 LIMIT 1);
+SET @org_dst := (SELECT t.OrgId FROM SysTenant t WHERE t.Id = @dst LIMIT 1);
+
+
+-- ===========================================================================
+-- 01 · PersonSkill  COPY 5   （人员技能）
+--     业务键 Code = 101/102/301/501/602
+--     rekey：CompanyRefId/FactoryRefId 1000 → 目标租户组织
+--     hygiene：Name 去掉 seed 标记 "[DEMO] "，业务名（纵割/工中核心/…）不变
+-- ===========================================================================
+INSERT INTO PersonSkill (tenant_id, CompanyRefId, FactoryRefId, Code, Name, SkillLevel, Remark, IsEnabled, CreatedAt, UpdatedAt)
+SELECT @dst, @org_dst, @org_dst, s.Code,
+       TRIM(REPLACE(s.Name, '[DEMO]', '')),
+       s.SkillLevel, s.Remark, 1, NOW(), NOW()
+FROM PersonSkill s
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM PersonSkill x
+                  WHERE x.tenant_id = @dst AND x.CompanyRefId = @org_dst
+                    AND x.FactoryRefId = @org_dst AND x.Code = s.Code);
+
+
+-- ===========================================================================
+-- 02 · EmpSkills  CONSTRUCT 10   （人员技能维护）
+--     5 名 UAT 真实生产员工 × 各 2 项技能（1 主 4 级 + 1 备 3 级），每技能恰好 2 人
+--     Site（工作组）留 NULL —— 源值 "[DEMO]数控组" 不适用于 UAT，且不发明
+--     JOIN 保证 Employee / SkillNo 双向 FK 闭合
+-- ===========================================================================
+INSERT INTO EmpSkills (tenant_id, Employee, EmployeeID, EmployeeName, Site, SkillNo, SkillDescription, SkillLevel, Domain, CreateTime, UpdateTime)
+SELECT @dst, c.emp, c.emp, e.Name, NULL, c.skill, p.Name, c.lvl, '8010', NOW(), NOW()
+FROM (
+            SELECT 'RQTJ022' AS emp, '101' AS skill, 4 AS lvl
+  UNION ALL SELECT 'RQTJ022', '102', 3
+  UNION ALL SELECT 'RQTJ033', '102', 4
+  UNION ALL SELECT 'RQTJ033', '301', 3
+  UNION ALL SELECT 'RQTJ939', '301', 4
+  UNION ALL SELECT 'RQTJ939', '501', 3
+  UNION ALL SELECT 'RQTJ940', '501', 4
+  UNION ALL SELECT 'RQTJ940', '602', 3
+  UNION ALL SELECT 'RQTJ987', '602', 4
+  UNION ALL SELECT 'RQTJ987', '101', 3
+) c
+JOIN EmployeeMaster e ON e.tenant_id = @dst AND e.Employee = c.emp
+JOIN PersonSkill    p ON p.tenant_id = @dst AND p.Code     = c.skill
+WHERE @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM EmpSkills x
+                  WHERE x.tenant_id = @dst AND x.Domain = '8010'
+                    AND x.Employee = c.emp AND x.SkillNo = c.skill);
+
+
+-- ===========================================================================
+-- 03 · ImageType  COPY 4   （SOP 文件类型）
+--     ★ DEMO-hygiene：image_type_id 是页面「文件类型编码」列直接展示给用户的业务码
+--       （SopFileTypeList.vue:15），故 rekey DEMO-SOP-* → UATD-SOP-*
+--       实测 UATD-SOP-* 全库碰撞 = 0
+--     ★ 源 domain 存的是 797 组织 Id（字段被误用），rekey 为 '8010'
+-- ===========================================================================
+INSERT INTO ImageType (tenant_id, image_type_id, descr, domain)
+SELECT @dst,
+       REPLACE(s.image_type_id, 'DEMO-', 'UATD-'),
+       TRIM(REPLACE(s.descr, '[DEMO]', '')),
+       '8010'
+FROM ImageType s
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM ImageType x
+                  WHERE x.tenant_id = @dst AND x.domain = '8010'
+                    AND x.image_type_id = REPLACE(s.image_type_id, 'DEMO-', 'UATD-'));
+
+
+-- ===========================================================================
+-- 04 · QualitySegmentImage  CONSTRUCT 3   （SOP 维护）
+--     ★ image_type_id 是 varchar 业务码，按【目标】业务码回绑，
+--       绝不复制源码值；JOIN ImageType 强制目标侧存在
+--     item/op 均取自 UAT 真实 Routing
+-- ===========================================================================
+INSERT INTO QualitySegmentImage (tenant_id, line, item_num, op, image_type_id, descr, rev, sort_id, domain)
+SELECT @dst, c.line, c.item, c.op, it.image_type_id, c.descr, 'A.0', c.sort, c.dom
+FROM (
+            SELECT 'M01'  AS line, '91HC0497'  AS item, '101' AS op, 'UATD-SOP-WI' AS itype, '作业指导书-底板组件安装脚垫' AS descr, 1 AS sort, '8010' AS dom
+  UNION ALL SELECT 'DD01',        '91HC0497',         '704',        'UATD-SOP-EQ',          '设备操作规程-主机包装',              2,        '8010'
+  UNION ALL SELECT NULL,          '3221C0031',        '50',         'UATD-SOP-QC',          '检验规范-声波清洗',                  3,        '2410'
+) c
+JOIN ImageType  it ON it.tenant_id = @dst AND it.image_type_id = c.itype
+JOIN ItemMaster i  ON i.tenant_id  = @dst AND i.ItemNum        = c.item
+WHERE @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM QualitySegmentImage x
+                  WHERE x.tenant_id = @dst AND x.domain = c.dom
+                    AND x.item_num = c.item AND x.op = c.op
+                    AND x.image_type_id = c.itype);
+
+
+-- ===========================================================================
+-- 05 · PreprocessElementParam  COPY 5   （前处理要素参数）
+--     无外部 FK；device_number / message_code 为业务键
+--     ★ DEMO-hygiene：device_number(要素编码) 与 message_code(参数编码) 均为
+--       PreprocessElementParamList.vue:15/17 直接展示给用户的业务码，
+--       故一并 rekey DEMO-* → UATD-*（源侧字面量仅出现在 SELECT 表达式，
+--       不会成为目标投影值）：
+--         DEMO-PRE-ELEM-01/02/03  → UATD-PRE-ELEM-01/02/03
+--         DEMO-PRE-TEMP/TIME/DRYT/PRESS/SPEED → UATD-PRE-TEMP/TIME/DRYT/PRESS/SPEED
+--       实测 UATD-* 全表碰撞 = 0；两列均无跨表 code 引用（controller 只做关键字检索）
+--     descr 去 seed 标记
+-- ===========================================================================
+INSERT INTO PreprocessElementParam (tenant_id, device_number, device_descr, message_code, code_descr, value_type, std_value, top_limit, low_limit, ufld1, um, domain, create_time, update_time)
+SELECT @dst,
+       REPLACE(s.device_number, 'DEMO-', 'UATD-'),
+       TRIM(REPLACE(s.device_descr, '[DEMO]', '')),
+       REPLACE(s.message_code, 'DEMO-', 'UATD-'),
+       TRIM(REPLACE(s.code_descr, '[DEMO]', '')),
+       s.value_type, s.std_value, s.top_limit, s.low_limit, s.ufld1, s.um,
+       '8010', NOW(), NOW()
+FROM PreprocessElementParam s
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM PreprocessElementParam x
+                  WHERE x.tenant_id = @dst AND x.domain = '8010'
+                    AND x.device_number = REPLACE(s.device_number, 'DEMO-', 'UATD-')
+                    AND x.message_code  = REPLACE(s.message_code,  'DEMO-', 'UATD-'));
+
+
+-- ===========================================================================
+-- 06 · PreprocessElement  CONSTRUCT 4   （前处理要素）
+--     ★ 已修正：源候选 91HC0497@Op101 = "底板组件安装脚垫"，与「前处理/清洗」矛盾，已剔除
+--       改用 UAT Routing 中真实的清洗类工序：
+--         3221C0031@50 声波清洗 / 3124C0015@40 光清洗 / 322AD001@30 洗吹干 / 312CD008@60 清洗
+--       四者 ItemMaster.Domain 与 Routing.Domain 同为 2410，无域歧义
+--     line 留 NULL —— UAT 20 条产线均为 8010 装配/包装线，与这些 2410 机加工序不匹配，不发明
+-- ===========================================================================
+INSERT INTO PreprocessElement (tenant_id, item_num, op, line, typed, item_code, descr, is_main, domain, create_time, update_time)
+SELECT @dst, c.item, c.op, NULL, c.typed, c.code, c.descr, 1, '2410', NOW(), NOW()
+FROM (
+            SELECT '3221C0031' AS item, '50' AS op, 'CLEAN' AS typed, 'UATD-PRE-01' AS code, '前处理-声波清洗' AS descr
+  UNION ALL SELECT '3124C0015',        '40',        'CLEAN',          'UATD-PRE-02',          '前处理-光清洗'
+  UNION ALL SELECT '322AD001',         '30',        'CLEAN',          'UATD-PRE-03',          '前处理-洗吹干'
+  UNION ALL SELECT '312CD008',         '60',        'CLEAN',          'UATD-PRE-04',          '前处理-清洗'
+) c
+JOIN ItemMaster i ON i.tenant_id = @dst AND i.ItemNum = c.item
+WHERE @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM PreprocessElement x
+                  WHERE x.tenant_id = @dst AND x.domain = '2410'
+                    AND x.item_num = c.item AND x.is_main = 1);
+
+
+-- ===========================================================================
+-- 07 · DevMonitor  COPY 5   （生产要素参数）
+--     ★ 页面 element-param-production 实际读的是 DevMonitor（非 ElementParam 孤儿表）
+--     无外部 FK
+--     ★ DEMO-hygiene：DeviceNumber(要素编码) 与 MessageCode(参数编码) 均为
+--       ProductionElementParamList.vue:15/17 直接展示给用户的业务码，故一并 rekey：
+--         DEMO-ELEM-01/02/03 → UATD-ELEM-01/02/03
+--         DEMO-TEMP/PRESS/SPEED/CURR/HUMI → UATD-TEMP/PRESS/SPEED/CURR/HUMI
+--       实测 UATD-* 全表碰撞 = 0；两列均无跨表 code 引用
+-- ===========================================================================
+INSERT INTO DevMonitor (tenant_id, DeviceNumber, DeviceDescr, MessageCode, CodeDescr, ValueType, StdValue, TopLimit, LowLimit, Ufld1, UM, CodeType, Domain, CreateTime, UpdateTime)
+SELECT @dst,
+       REPLACE(s.DeviceNumber, 'DEMO-', 'UATD-'),
+       TRIM(REPLACE(s.DeviceDescr, '[DEMO]', '')),
+       REPLACE(s.MessageCode, 'DEMO-', 'UATD-'),
+       TRIM(REPLACE(s.CodeDescr, '[DEMO]', '')),
+       s.ValueType, s.StdValue, s.TopLimit, s.LowLimit, s.Ufld1, s.UM,
+       s.CodeType, '8010', NOW(), NOW()
+FROM DevMonitor s
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM DevMonitor x
+                  WHERE x.tenant_id = @dst AND x.Domain = '8010'
+                    AND x.DeviceNumber = REPLACE(s.DeviceNumber, 'DEMO-', 'UATD-')
+                    AND x.MessageCode  = REPLACE(s.MessageCode,  'DEMO-', 'UATD-')
+                    AND x.CodeType = s.CodeType);
+
+
+-- ===========================================================================
+-- 08 · ProdLineDetail  CONSTRUCT 6   （生产线物料）
+--     ★ 上一轮 12 行已作废：那 4 个物料的工序是冲压/数控/机加工，
+--       而 UAT 20 条产线全是组装/包装/热封线，属不同生产域，语义不成立
+--     改用 UAT 唯一整机装配件 91HC0497（36 道真实装配工序，Item/Routing 同为 Domain 8010）
+--     仅保留 HIGH/MEDIUM 可解释行；601 拷机→能量线 等 LOW 行已删除
+-- ===========================================================================
+INSERT INTO ProdLineDetail (tenant_id, Part, Op, Site, Line, Rate, SetupTime, OverlapTime, Sequence, StandardStaffCount, IsActive, IsConfirm, Domain, CreateTime, UpdateTime)
+SELECT @dst, c.part, c.op, NULL, c.line, NULL, NULL, 0, c.seq, 1, 1, 0, '8010', NOW(), NOW()
+FROM (
+            SELECT '91HC0497' AS part, 101 AS op, 'M01'  AS line, 1 AS seq
+  UNION ALL SELECT '91HC0497',        201,        'P01',         2
+  UNION ALL SELECT '91HC0497',        301,        'BD01',        3
+  UNION ALL SELECT '91HC0497',        401,        'BN01',        4
+  UNION ALL SELECT '91HC0497',        501,        'BD02',        5
+  UNION ALL SELECT '91HC0497',        704,        'DD01',        6
+) c
+JOIN ItemMaster i ON i.tenant_id = @dst AND i.ItemNum = c.part
+JOIN LineMaster l ON l.tenant_id = @dst AND l.Line    = c.line
+WHERE @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM ProdLineDetail x
+                  WHERE x.tenant_id = @dst AND x.Domain = '8010'
+                    AND x.Part = c.part AND x.Op = c.op AND x.Line = c.line);
+
+
+-- ===========================================================================
+-- 09 · ItemOpCondition  CONSTRUCT 5   （物料工艺要素）
+--     ★ 页面 material-process-element 实际读 ItemOpCondition（非 MaterialProcessElement 孤儿表）
+--     UK = tenant+Domain+ItemNum+IsMain+CodeType → 每物料一行
+--     Op 全部取自各物料真实 Routing；仅 91HC0497 有可解释产线，其余 Line 留 NULL 不发明
+-- ===========================================================================
+INSERT INTO ItemOpCondition (tenant_id, ItemNum, Op, Line, Typed, ItemCode, Descr, IsMain, CodeType, Domain, CreateTime, UpdateTime)
+SELECT @dst, c.item, c.op, c.line, c.typed, c.code, c.descr, 1, 'Prod', c.dom, NOW(), NOW()
+FROM (
+            SELECT '91HC0497'  AS item, '101' AS op, 'M01' AS line, 'ASSY'  AS typed, 'UATD-OPC-01' AS code, '底板组件安装脚垫工序生产要素' AS descr, '8010' AS dom
+  UNION ALL SELECT '3124C0015',        '10',        NULL,          'PRESS', 'UATD-OPC-02',          '压铆苞工序生产要素',                   '2410'
+  UNION ALL SELECT '3123C0013',        '10',        NULL,          'MACH',  'UATD-OPC-03',          '胀管工序生产要素',                     '2410'
+  UNION ALL SELECT '3221C0031',        '10',        NULL,          'PRESS', 'UATD-OPC-04',          '落片工序生产要素',                     '2410'
+  UNION ALL SELECT '3521C0015',        '10',        NULL,          'GRIND', 'UATD-OPC-05',          '磨六面工序生产要素',                   '2410'
+) c
+JOIN ItemMaster i ON i.tenant_id = @dst AND i.ItemNum = c.item
+WHERE @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM ItemOpCondition x
+                  WHERE x.tenant_id = @dst AND x.Domain = c.dom
+                    AND x.ItemNum = c.item AND x.IsMain = 1 AND x.CodeType = 'Prod');
+
+
+-- ===========================================================================
+-- 10 · ItemPackMaster  CONSTRUCT 10   （零件包装规格）
+--     ★ Provenance = UAT_DEMO_SEED，不是真实包装规格：
+--       AIDOPB 574 行虽与 UAT 交集 17，但 PackingQty=999999999、净重/长宽高全 0、
+--       类型全 NULL，属占位垃圾；AIDOP 797 交集仅 1 行且同样为占位值 → 拒绝 COPY
+--     包装数量依 ItemType 类别单调分级（RS11 耗材 > RS12 零件 > RS13 附件 > RS30 整机）
+--     ★ uk_ItemPackMaster_domain_itemnum 不含 tenant：
+--       10 个物料全部取自实测「Domain 8010 下无占用」的 16 个物料集
+-- ===========================================================================
+INSERT INTO ItemPackMaster (tenant_id, company_ref_id, factory_ref_id, Domain, ItemNum, PackingType, PackingQty, WeightUM, DimUM, IsActive, IsConfirm, Descr, CreateTime, UpdateTime)
+SELECT @dst, @org_dst, @org_dst, '8010', c.item, c.ptype, c.qty, 'KG', 'MM', 1, 0, c.descr, NOW(), NOW()
+FROM (
+            SELECT '91C0D2C'  AS item, '中包装' AS ptype,   50 AS qty, '管组件中包装'   AS descr
+  UNION ALL SELECT '91CC0231',        '中包装',            50,        '管组件中包装'
+  UNION ALL SELECT '1A03B22',         '中包装',           100,        '零件中包装'
+  UNION ALL SELECT '1A0C885',         '小包装',           200,        '小零件包装'
+  UNION ALL SELECT '1AB9275',         '小包装',           200,        '小零件包装'
+  UNION ALL SELECT '91A0DC9',         '中包装',           100,        '零件中包装'
+  UNION ALL SELECT '81HC0497',        '整机包装',          10,        '主机小批包装'
+  UNION ALL SELECT '81HC0568',        '附件包装',          20,        '附件包装'
+  UNION ALL SELECT '91FC0295',        '整机包装',           5,        '整机最小包装'
+  UNION ALL SELECT 'A2C3115',         '耗材包装',        1000,        '标签耗材大批量包装'
+) c
+JOIN ItemMaster i ON i.tenant_id = @dst AND i.ItemNum = c.item
+WHERE @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM ItemPackMaster x
+                  WHERE x.Domain = '8010' AND x.ItemNum = c.item);
+
+
+-- ===========================================================================
+-- 11 · ItemSubstituteDetail  CONSTRUCT 6   （物料替代）
+--     源 797 的 10 行三个 Item 列与 UAT 交集全部为 0 → 不可 COPY
+--     6 条全部由 UAT 真实 BOM（9 个父件）推导，替代双方均为 UAT 已存在物料
+--     无自替代 / 无 A↔B 反向对 / 无循环
+-- ===========================================================================
+INSERT INTO ItemSubstituteDetail (tenant_id, ParentItem, ItemNum, SubstituteItem, SubstituteQty, SubstituteType, Remark, Domain, CreateTime, UpdateTime)
+SELECT @dst, c.parent, c.orig, c.sub, c.qty, c.stype, c.remark, c.dom, NOW(), NOW()
+FROM (
+            SELECT '91C0D2C'  AS parent, '3123C0013' AS orig, '312CD0A'   AS sub, 1.000000 AS qty, '替代' AS stype, '同属91C0D2C BOM，描述同为「工（2305H原材料改善后）」，等量替代' AS remark, '8010' AS dom
+  UNION ALL SELECT '91CC0231',          '3123C0014',        '3223C0011',        1.000000,        '替代',          '同属91CC0231 BOM，1405H同规格互换',                              '8010'
+  UNION ALL SELECT '3124C0015',         '3152C0C7',         '3152C0C8',         1.000000,        '替代',          '同属3124C0015 BOM，4*B0.1*5*D6*50L-4F ↔ 3*B0.1*4*D6*50L-4F 同系列', '2410'
+  UNION ALL SELECT '3124C0015',         '3152B0273',        '3152B0274',        1.000000,        '替代',          '同属3124C0015 BOM，3.0*4D*50L-4T ↔ 2.0*4D*50L-4T 同系列降规格',    '2410'
+  UNION ALL SELECT '3124C0015',         '3521C0015',        '3521C0016',        1.000000,        '替代',          '同属3124C0015 BOM，60/45 两款共用件互换',                          '2410'
+  UNION ALL SELECT '91C0D2C',           '312CD008',         '3145C0047',        1.000000,        '取代',          '同属91C0D2C BOM，F3605H-M ↔ EF3605P 同位取代',                    '8010'
+) c
+JOIN ItemMaster p ON p.tenant_id = @dst AND p.ItemNum = c.parent
+JOIN ItemMaster o ON o.tenant_id = @dst AND o.ItemNum = c.orig
+JOIN ItemMaster b ON b.tenant_id = @dst AND b.ItemNum = c.sub
+WHERE @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM ItemSubstituteDetail x
+                  WHERE x.tenant_id = @dst AND x.Domain = c.dom
+                    AND x.ParentItem = c.parent AND x.ItemNum = c.orig
+                    AND x.SubstituteItem = c.sub);
+
+
+-- ===========================================================================
+-- 12 · ic_substitute  CONSTRUCT 5   （选择替代方案）
+--     源 797 的 796 行 substitute_code 为 1003779A 类不可读码、strategy/mode 全 0，
+--     无 demo 价值且与 UAT 物料零交集 → 不 COPY
+--     构造 5 个方案头 = §11 六条替代关系去重后的原物料
+--     ★ 该表 PK 非 auto_increment → 固定 ID 块 3200000000000012001..12005
+-- ===========================================================================
+INSERT INTO ic_substitute (Id, tenant_id, substitute_code, substitute_strategy, substitute_mode, substitute_type, company_id, factory_id, IsDeleted, org_id, create_time, update_time)
+SELECT c.new_id, @dst, c.code, 0, 0, 0, @org_dst, @org_dst, 0, @org_dst, NOW(), NOW()
+FROM (
+            SELECT 3200000000000012001 AS new_id, '3123C0013' AS code
+  UNION ALL SELECT 3200000000000012002,           '3123C0014'
+  UNION ALL SELECT 3200000000000012003,           '3152C0C7'
+  UNION ALL SELECT 3200000000000012004,           '3152B0273'
+  UNION ALL SELECT 3200000000000012005,           '3521C0015'
+) c
+JOIN ItemMaster i ON i.tenant_id = @dst AND i.ItemNum = c.code
+WHERE @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM ic_substitute x
+                  WHERE x.tenant_id = @dst AND x.substitute_code = c.code
+                    AND x.substitute_strategy = 0 AND x.substitute_mode = 0);
+
+
+-- ===========================================================================
+-- 13 · S0ProcessFlowCard  CONSTRUCT 4   （工序流转卡）
+--     源 4 行 item_num 与 UAT 交集为 0 → 不可 COPY
+--     routing_code 取物料号（实测该表 RoutingCode 即 MaterialCode）
+-- ===========================================================================
+INSERT INTO S0ProcessFlowCard (tenant_id, company_ref_id, factory_ref_id, domain_code, work_order_no, work_order_batch_no, flow_card_no, nature, item_num, item_name, routing_code, is_active, create_time, update_time)
+SELECT @dst, @org_dst, @org_dst, i.Domain, c.wo, '01', c.fc, '正常', c.item, i.Descr, c.item, 1, NOW(), NOW()
+FROM (
+            SELECT 'FC-UATD-0001' AS fc, 'WO-UATD-0001' AS wo, '91HC0497'  AS item
+  UNION ALL SELECT 'FC-UATD-0002',        'WO-UATD-0002',        '91C0D2C'
+  UNION ALL SELECT 'FC-UATD-0003',        'WO-UATD-0003',        '91CC0231'
+  UNION ALL SELECT 'FC-UATD-0004',        'WO-UATD-0004',        '3124C0015'
+) c
+JOIN ItemMaster i ON i.tenant_id = @dst AND i.ItemNum = c.item
+WHERE @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM S0ProcessFlowCard x
+                  WHERE x.tenant_id = @dst AND x.factory_ref_id = @org_dst
+                    AND x.flow_card_no = c.fc);
+
+
+-- ===========================================================================
+-- 14 · wms_rwzp  CONSTRUCT 4   （物料状态任务指派）
+--     ★ 源 4 行的库位 yskw/mdkw(1000–1005) 实测在 UAT 100% 闭合 → 库位沿用源真实值
+--       但 wlbm（物料）与 sqr（申请人）在 UAT 不存在 → 换 UAT 真实物料与真实生产员工
+--     库位流向业务合理：待检→合格 / 合格→材料 / 材料→辅料 / 不合格→料不良品
+-- ===========================================================================
+INSERT INTO wms_rwzp (tenant_id, company_ref_id, factory_ref_id, domain_code, tcrq, sqr, rwlx, wlbm, sl, rqpc, yskw, mdkw, xqsj, zt, create_time, update_time)
+SELECT @dst, @org_dst, @org_dst, '8010', NOW(), e.Name, c.rwlx, c.wlbm, c.sl, c.rqpc, c.ys, c.md, NOW(), c.zt, NOW(), NOW()
+FROM (
+            SELECT '移库' AS rwlx, '91HC0497'  AS wlbm, 10 AS sl, 'UATD-20260828-01' AS rqpc, '1000' AS ys, '1001' AS md, '待处理' AS zt, 'RQTJ022' AS emp
+  UNION ALL SELECT '上架',        '91C0D2C',          50,       'UATD-20260828-02',          '1001',          '1003',          '处理中',          'RQTJ033'
+  UNION ALL SELECT '领料',        '91CC0231',         30,       'UATD-20260828-03',          '1003',          '1005',          '已完成',          'RQTJ939'
+  UNION ALL SELECT '移库',        '1A0C885',          20,       'UATD-20260828-04',          '1002',          '1004',          '待处理',          'RQTJ940'
+) c
+JOIN ItemMaster      i  ON i.tenant_id  = @dst AND i.ItemNum  = c.wlbm
+JOIN EmployeeMaster  e  ON e.tenant_id  = @dst AND e.Employee = c.emp
+JOIN LocationMaster  ls ON ls.tenant_id = @dst AND ls.location = c.ys
+JOIN LocationMaster  ld ON ld.tenant_id = @dst AND ld.location = c.md
+WHERE @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM wms_rwzp x
+                  WHERE x.tenant_id = @dst AND x.company_ref_id = @org_dst
+                    AND x.factory_ref_id = @org_dst AND x.domain_code = '8010'
+                    AND x.rwlx = c.rwlx AND x.wlbm = c.wlbm AND x.rqpc = c.rqpc
+                    AND x.yskw = c.ys AND x.mdkw = c.md);
+
+
+-- ===========================================================================
+-- 15 · PriorityCode  COPY 4   （订单优先级配置）
+--     真实配置：客户优先级/工单加急/工单优先级/工单完工日期
+--     ★ RecID 为 varchar(36) GUID 且非 auto_increment → 固定 GUID 字面量（可预先稳定确定）
+-- ===========================================================================
+INSERT INTO PriorityCode (RecID, tenant_id, Descr, Value, Priority, SourceTable, SourceColumn, OrderBy, IsActive, Domain, CreateTime, UpdateTime)
+SELECT c.new_id, @dst, s.Descr, s.Value, s.Priority, s.SourceTable, s.SourceColumn, s.OrderBy, 1, '8010', NOW(), NOW()
+FROM PriorityCode s
+JOIN (
+            SELECT '客户优先级'   AS d, 'A0000000-0000-4000-8000-000000002B01' AS new_id
+  UNION ALL SELECT '工单加急',           'A0000000-0000-4000-8000-000000002B02'
+  UNION ALL SELECT '工单优先级',         'A0000000-0000-4000-8000-000000002B03'
+  UNION ALL SELECT '工单完工日期',       'A0000000-0000-4000-8000-000000002B04'
+) c ON c.d = s.Descr
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM PriorityCode x
+                  WHERE x.tenant_id = @dst AND x.Descr = s.Descr);
+
+
+-- ===========================================================================
+-- 16 · BarCodeType  COPY 6   （标签格式）
+--     无外部 FK；(domain_code, bar_type) 为业务键
+--     必须先于 BarCodeNbr（条码规则的 Type 引用这里）
+-- ===========================================================================
+INSERT INTO BarCodeType (tenant_id, company_ref_id, factory_ref_id, domain_code, bar_type, class, input_string, create_time, update_time)
+SELECT @dst, @org_dst, @org_dst, s.domain_code, s.bar_type, s.class, s.input_string, NOW(), NOW()
+FROM BarCodeType s
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM BarCodeType x
+                  WHERE x.tenant_id = @dst AND x.domain_code = s.domain_code
+                    AND x.bar_type = s.bar_type);
+
+
+-- ===========================================================================
+-- 17 · BarCodeNbr  COPY 2   （条码规则）
+--     ★ 源 3 行中 Customer=10000001 在 UAT 不存在；
+--       把条码构成规则改挂到其它客户等于断言两家客户条码格式相同 —— 无依据 → DROP
+--     仅 COPY 客户 10000000(瑞贝德) / 10000002(通广) 两条，FK 由 JOIN CustMaster 强制
+--     FirmString*Note 去 seed 标记
+-- ===========================================================================
+INSERT INTO BarCodeNbr (tenant_id, company_ref_id, factory_ref_id, Domain, Type, Customer, WaterRules, WaterLen, `Separator`, FirmLength, FirmString1, FirmStringLen1, FirmString1Note, FirmString2, FirmStringLen2, FirmString2Note, ItemNum, CreateTime, UpdateTime)
+SELECT @dst, @org_dst, @org_dst, s.Domain, s.Type, s.Customer, s.WaterRules, s.WaterLen, s.`Separator`, s.FirmLength,
+       s.FirmString1, s.FirmStringLen1, TRIM(REPLACE(IFNULL(s.FirmString1Note, ''), '[DEMO]', '')),
+       s.FirmString2, s.FirmStringLen2, TRIM(REPLACE(IFNULL(s.FirmString2Note, ''), '[DEMO]', '')),
+       s.ItemNum, NOW(), NOW()
+FROM BarCodeNbr s
+JOIN CustMaster  cu ON cu.tenant_id = @dst AND cu.Cust    = s.Customer
+JOIN BarCodeType bt ON bt.tenant_id = @dst AND bt.bar_type = s.Type AND bt.domain_code = s.Domain
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM BarCodeNbr x
+                  WHERE x.tenant_id = @dst AND x.Domain = s.Domain
+                    AND x.Customer = s.Customer AND x.Type = s.Type);
+
+
+-- ===========================================================================
+-- 18 · WorkOrdControl  COPY 1   （工单控制参数）
+--     ★ 页面 work-order-control 实际读 WorkOrdControl（非 WorkOrderControl 孤儿模型）
+--     单例配置（UK = tenant_id + Domain）；全部参数取源真实值，不发明
+--     Domain 保持源真实兼容语义（源为空串，DTO 明确其已降级为历史兼容字段）
+-- ===========================================================================
+INSERT INTO WorkOrdControl (tenant_id, EnteringPer, PaintingPer, IssuedInterval, PostVarsatSFC, IsIssued, IsPrintRejectBarcode, IsPrintScrapBarcode, IsQualityConfirm, Domain, IsActive, IsConfirm, CreateTime, UpdateTime)
+SELECT @dst, s.EnteringPer, s.PaintingPer, s.IssuedInterval, s.PostVarsatSFC, s.IsIssued,
+       s.IsPrintRejectBarcode, s.IsPrintScrapBarcode, s.IsQualityConfirm,
+       s.Domain, s.IsActive, s.IsConfirm, NOW(), NOW()
+FROM WorkOrdControl s
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM WorkOrdControl x
+                  WHERE x.tenant_id = @dst AND x.Domain = s.Domain);
+
+
+-- ===========================================================================
+-- 19 · ado_kitting_exclude_rule  COPY 1   （齐套检查排除规则）
+--     排除物料类型 ["RS11"] —— UAT 存在 RS11 物料（A2C3115），配置有效
+--     ★ 该表 PK 非 auto_increment → 固定 ID 3200000000000019001
+--     该表无业务 UK → 用逻辑幂等键 (tenant_id, excluded_item_types, excluded_owner_apps)
+-- ===========================================================================
+INSERT INTO ado_kitting_exclude_rule (id, tenant_id, excluded_item_types, excluded_owner_apps, is_active, remark, create_time, update_time)
+SELECT 3200000000000019001, @dst, s.excluded_item_types, s.excluded_owner_apps, s.is_active, s.remark, NOW(), NOW()
+FROM ado_kitting_exclude_rule s
+WHERE s.tenant_id = @src
+  AND @src IS NOT NULL AND @dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM ado_kitting_exclude_rule x
+                  WHERE x.tenant_id = @dst
+                    AND x.excluded_item_types <=> s.excluded_item_types
+                    AND x.excluded_owner_apps <=> s.excluded_owner_apps);
+
+
+-- ===========================================================================
+-- 20 · S0ContractReviewCycle  COPY 5   （合同评审周期 · 主表）
+--     ★ 唯一数据源在兄弟租户 AIDOP-Demo(797…230)，且为【双工厂重复】：
+--         factory 1329900200002 = 5 main + 15 breakdown（完整）
+--         factory 1329900200003 = 5 main +  3 breakdown（残缺）
+--       UK = tenant+factory_ref_id+stage_code，两工厂 10 行 rekey 到同一目标工厂必然冲突
+--       → 只取完整的 …002 一套
+-- ===========================================================================
+INSERT INTO S0ContractReviewCycle (tenant_id, company_ref_id, factory_ref_id, domain_code, stage_code, stage_name, std_hours, order_no, is_active, create_time, update_time)
+SELECT @dst, @org_dst, @org_dst, '8010', s.stage_code, s.stage_name, s.std_hours, s.order_no, 1, NOW(), NOW()
+FROM S0ContractReviewCycle s
+WHERE s.tenant_id = @src_crc AND s.factory_ref_id = 1329900200002
+  AND @src_crc IS NOT NULL AND @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM S0ContractReviewCycle x
+                  WHERE x.tenant_id = @dst AND x.factory_ref_id = @org_dst
+                    AND x.stage_code = s.stage_code);
+
+
+-- ===========================================================================
+-- 21 · S0ContractReviewCycleBreakdown  COPY 15   （合同评审周期 · 分解从表）
+--     主从链完整：15 条 parent_stage_code 全部命中上一条插入的 5 条主表阶段
+--     实证一致性：分解工时按阶段求和 = 8/12/8/10/2，与主表 std_hours 精确相等
+--     JOIN 主表强制父子闭合，杜绝「只补 main 不补 breakdown」或父键悬空
+-- ===========================================================================
+INSERT INTO S0ContractReviewCycleBreakdown (tenant_id, company_ref_id, factory_ref_id, domain_code, parent_stage_code, group_code, group_name, std_hours, order_no, is_active, create_time, update_time)
+SELECT @dst, @org_dst, @org_dst, '8010', s.parent_stage_code, s.group_code, s.group_name, s.std_hours, s.order_no, 1, NOW(), NOW()
+FROM S0ContractReviewCycleBreakdown s
+JOIN S0ContractReviewCycle m
+  ON m.tenant_id = @dst AND m.factory_ref_id = @org_dst AND m.stage_code = s.parent_stage_code
+WHERE s.tenant_id = @src_crc AND s.factory_ref_id = 1329900200002
+  AND @src_crc IS NOT NULL AND @dst IS NOT NULL AND @org_dst IS NOT NULL
+  AND NOT EXISTS (SELECT 1 FROM S0ContractReviewCycleBreakdown x
+                  WHERE x.tenant_id = @dst AND x.factory_ref_id = @org_dst
+                    AND x.parent_stage_code = s.parent_stage_code
+                    AND x.group_code = s.group_code);

server/Admin.NET.Web.Entry/UpdateScripts/1.0.408.verify.sql

@@ -0,0 +1,222 @@
+-- ===========================================================================
+-- STEP 2B VERIFY —— 全部为 SELECT 真值标量断言（AutoVersionUpdate 的 IsTruthy 契约）
+-- 禁用 SET / 用户变量：租户与组织一律内联子查询
+-- 文件以最后一条 SQL 的 ; 结束
+-- ===========================================================================
+
+-- ---------- §1 行数（21 张表，合计 110） ----------
+SELECT COUNT(*) = 5 FROM PersonSkill
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 10 FROM EmpSkills
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 4 FROM ImageType
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 3 FROM QualitySegmentImage
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM PreprocessElementParam
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 4 FROM PreprocessElement
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM DevMonitor
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 6 FROM ProdLineDetail
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM ItemOpCondition
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 10 FROM ItemPackMaster
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 6 FROM ItemSubstituteDetail
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM ic_substitute
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 4 FROM S0ProcessFlowCard
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 4 FROM wms_rwzp
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 4 FROM PriorityCode
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 6 FROM BarCodeType
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 2 FROM BarCodeNbr
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 1 FROM WorkOrdControl
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 1 FROM ado_kitting_exclude_rule
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM S0ContractReviewCycle
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 15 FROM S0ContractReviewCycleBreakdown
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+
+-- ---------- §2 FK 闭合（dangling 必须为 0） ----------
+SELECT COUNT(*) = 0 FROM EmpSkills s
+  WHERE s.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM EmployeeMaster e WHERE e.tenant_id = s.tenant_id AND e.Employee = s.Employee);
+SELECT COUNT(*) = 0 FROM EmpSkills s
+  WHERE s.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM PersonSkill p WHERE p.tenant_id = s.tenant_id AND p.Code = s.SkillNo);
+SELECT COUNT(*) = 0 FROM ProdLineDetail d
+  WHERE d.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = d.tenant_id AND i.ItemNum = d.Part);
+SELECT COUNT(*) = 0 FROM ProdLineDetail d
+  WHERE d.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM LineMaster l WHERE l.tenant_id = d.tenant_id AND l.Line = d.Line);
+SELECT COUNT(*) = 0 FROM ItemOpCondition c
+  WHERE c.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = c.tenant_id AND i.ItemNum = c.ItemNum);
+SELECT COUNT(*) = 0 FROM PreprocessElement p
+  WHERE p.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = p.tenant_id AND i.ItemNum = p.item_num);
+SELECT COUNT(*) = 0 FROM ItemPackMaster p
+  WHERE p.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = p.tenant_id AND i.ItemNum = p.ItemNum);
+SELECT COUNT(*) = 0 FROM ItemSubstituteDetail s
+  WHERE s.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = s.tenant_id AND i.ItemNum = s.ParentItem)
+      OR NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = s.tenant_id AND i.ItemNum = s.ItemNum)
+      OR NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = s.tenant_id AND i.ItemNum = s.SubstituteItem));
+SELECT COUNT(*) = 0 FROM ic_substitute c
+  WHERE c.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = c.tenant_id AND i.ItemNum = c.substitute_code);
+SELECT COUNT(*) = 0 FROM S0ProcessFlowCard f
+  WHERE f.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = f.tenant_id AND i.ItemNum = f.item_num);
+SELECT COUNT(*) = 0 FROM wms_rwzp w
+  WHERE w.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = w.tenant_id AND i.ItemNum = w.wlbm)
+      OR NOT EXISTS (SELECT 1 FROM LocationMaster l WHERE l.tenant_id = w.tenant_id AND l.location = w.yskw)
+      OR NOT EXISTS (SELECT 1 FROM LocationMaster l WHERE l.tenant_id = w.tenant_id AND l.location = w.mdkw));
+SELECT COUNT(*) = 0 FROM BarCodeNbr b
+  WHERE b.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (NOT EXISTS (SELECT 1 FROM CustMaster c WHERE c.tenant_id = b.tenant_id AND c.Cust = b.Customer)
+      OR NOT EXISTS (SELECT 1 FROM BarCodeType t2 WHERE t2.tenant_id = b.tenant_id AND t2.bar_type = b.Type AND t2.domain_code = b.Domain));
+SELECT COUNT(*) = 0 FROM QualitySegmentImage q
+  WHERE q.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (NOT EXISTS (SELECT 1 FROM ImageType it WHERE it.tenant_id = q.tenant_id AND it.image_type_id = q.image_type_id)
+      OR NOT EXISTS (SELECT 1 FROM ItemMaster i WHERE i.tenant_id = q.tenant_id AND i.ItemNum = q.item_num));
+SELECT COUNT(*) = 0 FROM S0ContractReviewCycleBreakdown b
+  WHERE b.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND NOT EXISTS (SELECT 1 FROM S0ContractReviewCycle m
+                    WHERE m.tenant_id = b.tenant_id AND m.factory_ref_id = b.factory_ref_id
+                      AND m.stage_code = b.parent_stage_code);
+
+-- ---------- §3 合同评审主从工时一致性（分解求和 = 主表 std_hours） ----------
+SELECT COUNT(*) = 0 FROM (
+  SELECT m.stage_code
+  FROM S0ContractReviewCycle m
+  JOIN S0ContractReviewCycleBreakdown b
+    ON b.tenant_id = m.tenant_id AND b.factory_ref_id = m.factory_ref_id AND b.parent_stage_code = m.stage_code
+  WHERE m.tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+  GROUP BY m.stage_code, m.std_hours
+  HAVING SUM(b.std_hours) <> m.std_hours
+) x;
+
+-- ---------- §4 业务键唯一性（目标租户内） ----------
+SELECT COUNT(*) = 0 FROM (SELECT Code FROM PersonSkill WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY Code HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT Employee, SkillNo FROM EmpSkills WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY Employee, SkillNo HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT image_type_id FROM ImageType WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY image_type_id HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT item_num, op, image_type_id FROM QualitySegmentImage WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY item_num, op, image_type_id HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT device_number, message_code FROM PreprocessElementParam WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY device_number, message_code HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT item_num, is_main FROM PreprocessElement WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY item_num, is_main HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT DeviceNumber, MessageCode, CodeType FROM DevMonitor WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY DeviceNumber, MessageCode, CodeType HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT Part, Op, Line FROM ProdLineDetail WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY Part, Op, Line HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT ItemNum, IsMain, CodeType FROM ItemOpCondition WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY ItemNum, IsMain, CodeType HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT ParentItem, ItemNum, SubstituteItem FROM ItemSubstituteDetail WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY ParentItem, ItemNum, SubstituteItem HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT substitute_code, substitute_strategy, substitute_mode FROM ic_substitute WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY substitute_code, substitute_strategy, substitute_mode HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT flow_card_no FROM S0ProcessFlowCard WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY flow_card_no HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT Descr FROM PriorityCode WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY Descr HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT domain_code, bar_type FROM BarCodeType WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY domain_code, bar_type HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT Domain, Customer, Type FROM BarCodeNbr WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY Domain, Customer, Type HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT stage_code FROM S0ContractReviewCycle WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY stage_code HAVING COUNT(*)>1) x;
+SELECT COUNT(*) = 0 FROM (SELECT parent_stage_code, group_code FROM S0ContractReviewCycleBreakdown WHERE tenant_id=(SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1) GROUP BY parent_stage_code, group_code HAVING COUNT(*)>1) x;
+
+-- ---------- §5 无 tenant 的 UK：ItemPackMaster(Domain+ItemNum) 必须做【全表】唯一断言 ----------
+SELECT COUNT(*) = 0 FROM (SELECT Domain, ItemNum FROM ItemPackMaster GROUP BY Domain, ItemNum HAVING COUNT(*)>1) x;
+
+-- ---------- §6 目标 scope：tenant / org / domain ----------
+SELECT COUNT(*) = 10 FROM ItemPackMaster
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND company_ref_id = (SELECT t.OrgId FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND factory_ref_id = (SELECT t.OrgId FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM PersonSkill
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND CompanyRefId = (SELECT t.OrgId FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND FactoryRefId = (SELECT t.OrgId FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM S0ContractReviewCycle
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND factory_ref_id = (SELECT t.OrgId FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 15 FROM S0ContractReviewCycleBreakdown
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND factory_ref_id = (SELECT t.OrgId FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 4 FROM ImageType
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND domain = '8010';
+
+-- ---------- §7 DEMO/AI 污染隔离（仅检查目标租户） ----------
+SELECT COUNT(*) = 0 FROM ImageType
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (image_type_id LIKE 'DEMO-%' OR image_type_id LIKE 'AI-%' OR descr LIKE '%[DEMO]%' OR descr LIKE '%AI测试%');
+SELECT COUNT(*) = 4 FROM ImageType
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND image_type_id LIKE 'UATD-SOP-%';
+SELECT COUNT(*) = 0 FROM QualitySegmentImage
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (image_type_id LIKE 'DEMO-%' OR descr LIKE '%[DEMO]%');
+SELECT COUNT(*) = 0 FROM PersonSkill
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (Name LIKE '%[DEMO]%' OR Name LIKE '%AI测试%' OR Code LIKE 'AI-%');
+SELECT COUNT(*) = 0 FROM DevMonitor
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (DeviceDescr LIKE '%[DEMO]%' OR CodeDescr LIKE '%[DEMO]%'
+      OR DeviceNumber LIKE 'DEMO-%' OR MessageCode LIKE 'DEMO-%');
+SELECT COUNT(*) = 5 FROM DevMonitor
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND DeviceNumber LIKE 'UATD-%' AND MessageCode LIKE 'UATD-%';
+SELECT COUNT(*) = 0 FROM PreprocessElementParam
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (device_descr LIKE '%[DEMO]%' OR code_descr LIKE '%[DEMO]%'
+      OR device_number LIKE 'DEMO-%' OR message_code LIKE 'DEMO-%');
+SELECT COUNT(*) = 5 FROM PreprocessElementParam
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND device_number LIKE 'UATD-%' AND message_code LIKE 'UATD-%';
+SELECT COUNT(*) = 0 FROM BarCodeNbr
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (FirmString1Note LIKE '%[DEMO]%' OR FirmString2Note LIKE '%[DEMO]%');
+SELECT COUNT(*) = 0 FROM ItemOpCondition
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (Descr LIKE '%S0DEMO_BATCH1%' OR Descr LIKE '%[DEMO]%');
+SELECT COUNT(*) = 0 FROM PreprocessElement
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (descr LIKE '%[DEMO]%' OR item_code LIKE 'DEMO-%');
+SELECT COUNT(*) = 0 FROM wms_rwzp
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1)
+    AND (rwlx LIKE '%[DEMO]%' OR zt LIKE '%[DEMO]%' OR rqpc LIKE 'DEMO-%');
+
+-- ---------- §8 LineSkill 必须仍为 0（确认 Site 未被发明） ----------
+SELECT COUNT(*) = 0 FROM LineSkillMaster
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 0 FROM LineSkillDetail
+  WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+
+-- ---------- §9 源租户 / 默认租户未被写入（本批只读它们） ----------
+SELECT COUNT(*) = 5 FROM PersonSkill WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='AIDOP' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 8 FROM EmpSkills   WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='AIDOP' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 4 FROM ImageType   WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='AIDOP' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 1 FROM WorkOrdControl WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='AIDOP' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 10 FROM S0ContractReviewCycle WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='AIDOP-Demo' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 18 FROM S0ContractReviewCycleBreakdown WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='AIDOP-Demo' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM ImageType WHERE tenant_id = 1300000000001;
+SELECT COUNT(*) = 5 FROM PreprocessElementParam WHERE tenant_id = 1300000000001;
+SELECT COUNT(*) = 5 FROM DevMonitor WHERE tenant_id = 1300000000001;
+
+-- ---------- §10 既有 S0 主数据回归（不得被本批影响） ----------
+SELECT COUNT(*) = 5 FROM CustMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 7 FROM DepartmentMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 26 FROM EmployeeMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 13 FROM SuppMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 56 FROM ItemMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 18 FROM LocationMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 20 FROM LineMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 7 FROM WorkCtrMaster WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 5 FROM qms_inspection_method WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);
+SELECT COUNT(*) = 7 FROM qms_jygf WHERE tenant_id = (SELECT t.Id FROM SysTenant t JOIN SysOrg o ON o.Id=t.OrgId WHERE o.Code='UATTEST_CHL' AND t.Status=1 LIMIT 1);